Photos details of 2g 3g 4g signal booster:
13 Meters Coaxial Cable:
Connector Type: N-male to N-male
Cable Color: White
Cable Length: 13 Meters
Cable Type: RG6 Coaxial Cable
4G Signal Booster Lte 700 800 1800 2100 2300 2600MHz Mobile Signal Booster for home, office
How it work:
1). The outdoor antenna received the mobile signal from signal tower.
2). The booster receives the outside signal from the outside antenna.
3). The booster improve the outside signal and send it to the indoor antenna.
4). The indoor antenna broadcasts the boosted signal to devices inside the home.
Easy 4 steps of installation:
1). Find an appropriate position where can getting strong mobile signal to install the outdoor antenna and toward to the cell signal tower. (usually installed it on the roof or balcony and at least 3 bars signal indicated on your phone display).
2). Connect the outdoor antenna to the signal booster via the cable.
3). Connect the indoor antenna to the signal booster.
4). Check all the connectors is tightened then plug in power. Done!
2,Indoor pen holder antenna X1
3,Outdoor stick antenna X1
4,20 meters cable X1
5,User manual X1
6,Power adapter X1
1,Intelligent to guide the installation with LCD
After- Sales Service
We have 12 months quality guarantee for all customers, you can return goods to us when receive defective repeater, but air freight charges should be responsible by buyer.
Signal problem installation technique supporting
1.If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM.
2.If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well.
3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line.
4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover area.