







FAQ:
1: Is this device suitable for my car?
This is a 10.26″ universal car radio, just fix it on the center console.
2: How to connect wireless carplay/android auto?
First pair the mobile phone with Bluetooth, and then connect to the WIFI signal. After both are connected, carplay/android auto will automatically jump to the corresponding interface.
3: How to connect wired android auto?
It can be connected through the mobile phone data cable, please pay attention to use the original car cable that can be used for data transmission.
4: Why is there no sound from the device?
1. The AUX cable is inserted, and the FM transmitter switch is turned on.
2. When the FM transmitter switch is turned on, the speaker has no sound.
5: Is it possible to transmit audio to the car’s speakers via Bluetooth?
No, only via AUX cable or FM channel.
6: How to sync sound via FM?
Turn on the FM Transmitter on the device, adjust the channel of the car radio to a blank station, and set the radio on the device to the same frequency as the radio on the car, the setting is complete.
7: How to sync sound via AUX cable?
Find the AUX cable, then connect one end of the cable to the “audio” port on the slide right of the device, connect the other end to the AUX-IN port on the car, and enter the AUX playback interface of the car radio to synchronize the sound – Set up.
8: Why doesn’t the screen light up?
(1). Check whether the power supply is plugged in properly (connect with type-c port next to AV port). One end of the cigarette lighter is installed in place, and the other end will be connected to the lowermost DC 12V power supply port on the left side of the device.
(2). After confirming that the power is turned on, if the screen is still not on, there is a reset button on the back of the device, press and hold for 3 seconds.
(3). Software problems, you can upgrade the software, please contact customer service.
9: What should I do if the picture of rear camera is shaking?
(1). Please Check whether the rear camera line is plugged in AV port properly (Note: should connect the rear camera at first, then power on machine)
(2). Then restart the device
10: Can I use the rear camera of the original car/other brand?
No, only the rear camera of Imageon is supported, the camera of the original car/other brands is not suitable for the device.