DMX Wireless Transmitter Receiver DMX512 Laser Light Controller 2.4G for Stage Effect DJ Disco DMX Transmitter Receiver US Stock
DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data (generated by
console) by wireless way.No time delay when signal data is transmitting, signal data is real time
and reliably.This product adopts a 2.4G ISM frequency section.High effective GFSK
modulate,communication design; 126 channels jumping frequency automatically, high anti- jamming ability.
Receiver Product parameter:
1. 2.4G wireless DMX512 R/T
2. 126 channels jumping frequency automatically, high anti-jamming ability. to ensure works
3. 7 groups ID code settable,User can use 7 groups individual wireless net without any interfere
4. each other in the same place…(Tricolor LED displaying Indicators)
5. Input voltage: 5VDC 500mA MIN
6. Communication distance: 300M (visible distance)
7. Work frequency section: 2.4G ISM,126 channels.frequency section
8. Max transmitting power rate: 20dBm
9. Net weight: 180g /pcs
10. Warranty : 3 years
Operating manual ID code and LED color corresponding relationship
1. Press momentary switch above the side led indicator to indicate ID setting
2. Press again to set IC Œto the color ID desired,adding 1 each time you press the
switch will advance the color ID code.
3. Working condition LED constant lit up No DMX or wireless signal. Red LED flashï¼š
Transmitting. Green LED flash receiving
4. RF frequency 2.400 – 2.525G Œtotal 126 channelsï Œ it’s searching automatically,
5. ID Code groups ID code ¼Œpress ‘KEY’ for settingï Œit only can work under same
ID code of transmitter and receiver. (Same LED Color)
1. Power on DMX512 wireless received board first and then following to power up the transmitted board.
2. Press “Key” button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes.
4. Communication was established correctly.
1T 5R : 1pcs Transmitter + 5pcs Receiver + Adapters + Instructions ( Hot Selling )
1T 6R : 1pcs Transmitter + 6pcs Receiver+ Adapters + Instructions
1T 7R : 1pcs Transmitter + 7pcs Receiver + Adapters + Instructions ( Hot Selling )
Adapters Plug :
We have EU / US / UK / AU standard Plug, we default to send in accordance with national standards , If special needs, please leave a message.