G-MARK X180
X180 is a wireless microphone specifically designed for small and medium-sized speech, party, and street singing applications. Its design is beautiful, easy to use, metal handheld microphone, durable and durable. In addition, the unique neon halo design is particularly suitable for use in dark environments, and has lightning matching function, which is connected when powered on. The microphone is equipped with lightning frequency-changing buttons, which can change the frequency with one button, get rid of interference, and can adapt to the use of multiple wireless devices (with ID lock, the receiver will not match other microphones with the same frequency); At the same time, X180V has a barrier-free receiving distance of 80–100 meters, users can move in parks, classrooms and other venues to get rid of the constraints of the microphone cable.


















X180 Wireless Microphone
Product Features
Carrier frequency band: UHF adjustable (630-690MHz)
Digital audio transmission technology
Unique digital ID code pilot technology, ID code 32bit, completely solve the same frequency crosstalk phenomenon.
Ultra low audio delay.
Audio sampling mode: 48KHz.
Frequency range: 50Hz – 18KHz.
Receive automatic scanning
Open environment theory transmission distance: 50-80 meters
Handheld microphone specifications
Microphone type
Picking up way heart pointing
Frequency range 630 – 690MHz
RF bandwidth 60MHz
Frequency points 48
Transmitting power 10mW
Frequency response 50Hz – 18KHz
Dynamic range 96dB
Harmonic radiation <-50dBc
Distortion <0.1%
Power supply mode One 18650 lithium battery (3.7V)
Receiver specification
Frequency range 630 – 690MHz
RF bandwidth 60MHz
Frequency points 2*48
Signal to noise ratio 96dB
Receive sensitivity -95dBm
If there are multiple sets of products in the same environment, crosstalk may occur (same frequency with the same ID code)
Caused by the following steps, the pairing operation can be completely solved.
1. Adjust the transmission and reception to the shutdown state at the same time.
2. Transmitter: Press the power switch and the frequency hopping button simultaneously for about 4 seconds, the display will flash quickly.
status.
3. Receiver: Turn on the receiver power, the RF indicator flashes 4 times.
4. Transmitter: Short press the frequency hopping button to exit pairing.
Power switch
2. Frequency hopping switch
Power switch
2. RF LED
Frequency response 50Hz – 18KHz
Distortion 0.05%
Dynamic range 96dB
Receive delay 2.5ms
Power supply mode 12000mA lithium battery (3.7V)