Product Introduction: GEYIREN M17 HUD Head Up Display Dual system
. Please use the USB cable if car voltage > 24V.
. This product is a dual system: Users can freely choose the mode (press the ‘+’ key to select OBD or GPS system) before the OBD icon on screen stop to flash, it will automatically save and enter your last selected option.
OBD System (For OBD2 EOBD car)
Functions: Vehicle speed, engine RPM, water temperature, voltage, fuel consumption, altitude, clock, travel time, travel distance, number of compass satellites.
GPS System (For all cars)
Function: speed, voltage. Compass, number of satellites, speed icon, decorative strip

Safety Driving
80% of Accidents are Caused by Distraction Bow Your Head 3Seconds = Drive a Car 50 Meters Blindly

HUD short for Head Up Display, the main function is to reflect the car dashboard information (e.g., speed, RPM, water temperature, voltage, trip distance etc), and keep the driver eyes always on road to avoid the dangerous of lowering down head to read the instrument.

Easy To Install
Step 1: find out the OBD/USB interface in car.
Step 2: connect it with product.
Step 3: hide the cable in car.

Looking Forward Through The HUD
the outside scene can be easily merged with the data displayed by the HUD.

GPS can be used for all models
the navigation position displayed on the windshield of the car during driving.

Multifunctional Zone Speed
water temperature, voltage, mileage, driving time, fuel consumption, altitude, clock, 100 km acceleration

The Navigation Directions
HUD makes it easy to safely follow the navigation directions and keep track of your speed.

View your Multifunction
View your fuel level, RPM, engine temperature, voltage, and more — together with directions or any other widget.

This product is a dual system:
This product is a dual system:
(Press the ‘+’ key to select OBD or GPS system)
before the OBD icon on screen stops to flash, it will automatically save and enter your last selected option.



How to Install the HUD Car Computer:
1. Insert the product into the check port on the vehicle OBD computer.
2. Insert the other end of the product into the data interface of the host.
3. After the product is inserted into the host and the car is started, wait for the communication linkage between A202 and the car.