GSM LTE Signal Booster Amplifier 2G 3G 4G For Home, 900mhz 1800mhz 2100mhz WCDMA 65db Easy Setup High Gain Signal Repeater
Mobile Phone Signal Booster+ Internal omnidirectional Antenna+ 2G 3G 4GOutdoor Yagi Antenna+10meters Cable+ DC 5V Power Adapter
1.Work for GSM. 900MHz signal booster repeater.
2.Frequency range: Uplink: 890~915 MHz; Downlink:935~ 960 MHz
3.With LCD Display, can indicate the signal status.
4.Coverage area: cover about 200sqm without barrier.1 antenna cover about 100-150sqm.
5.High linear design, ALC technology.
6.1 set with outdoor antenna, indoor antenna, signal repeater. Ideal for home use.
7.Improve Indoor mobile signal, no more dropping calls, no more bad network speed.
There are some ways to check the frequency:(Frequency doesn’t match, the signal booster can’t work.)
1. Turn on the network (2G/3G/4G) you want to amplify and go outdoors of your house:
A: If you use Samsung phone. Holding the phone to the outside. Dial：*#0011#→ServiceMode→
B. If you use iPhone. Holding the phone to the outside. Dial: *3001#12345#*→ click into: Serving Cell info
2.Install an App: Network cell info Lite, and show the screenshot to us
Please make sure you can get at least 2 bars GSM 900mhz signal of outdoor before you buy, otherwise this product can’t help you. It needs outdoor good signal to improve your indoor signal.
The outdoor antenna must be installed in the direction of the base station that can receive the target signal
How to install
Step 1: Find a position where you could receive great signal, mostly a higher position, like at rooftop. Install outdoor antenna at it and make it toward the base station.
Note: the outdoor antenna shall receive good signal, otherwise the repeater will not work.
Step 2: Connect the outdoor antenna to booster at BTS connector with the cable.
Step 3: Connect indoor antenna to booster at MS connector. And it would be better to install it at a height of 2 meters.
Note: The two antennas shall be totally separated by a brick wall with a distance of at least 10 meters. Otherwise, the signal would intervene to each other, showing full of signal on display, but the booster doesn’t work properly.