Are you still using manual systems to troubleshoot hidden cameras?
We are different!
A fully functional detector with automatic search is available!
(1) 3 working modes: Lens focus scanning + infrared radio frequency alarm + intelligent retrieval signal
(2) This product integrates three detection methods in one, which can effectively detect the optical lens, emitted electromagnetic waves and infrared rays of pinhole cameras, bugs, locators and other equipment.
(3) Camera search new function – infrared radio alarm
detector detection camera functional technology breakthrough, detection of infrared camera will send sound and light alarm, detection distance, wide range, more rapid.
(4) A breakthrough in the original function-Lens focus scanning
Specially focused light beam: use a special beam generator to emit light to the target lens to detect the optical lens. In addition, an eyepiece focus adjustment knob is added to find the camera easily and accurately.
(5) Innovative infrared camera laser detection—Infrared + laser new detection mode
For infrared night vision cameras, the detector uses infrared + laser module for detection, accurate indication of camera orientation, accompanied by sound and light prompt, simple and fast.
(6) 5 x magnification optical blue light lens—It can detect 1mm micro lens
(7) Smart chips highly sensitive—Stable performance and improved induction range, Rf frequency detection range: 10-3000mhz
Accurate detection of candid camera, eavesdropping, GPS locator and other devices
(8) Ten-level radio wave intensity sensing—Radio waves, stronger scanning signal. Scanning speed is faster, the locator has no place to escape
(9) Precise positioning search positioning detection
Wired positioning/wireless positioning
Precise positioning and search, not miss any corner
As long as there is one, it can be found out, leaving illegal equipment nowhere to hide
(10) Large battery and long standby
Built-in 500mAh rechargeable lithium battery. A single charge lasts more than 12 hours. Shorter charging time, longer working time
1. As the device works in the infrared detection mode, the laser pointer is turned on at the same time, the laser has a certain damage to the human eye, so please do not illuminate the laser pointer to the eyes of people or animals.
2. Due to the high sensitivity of the infrared detection mode, when the daylight is sufficient, the sunlight also contains infrared light, which will cause false alarms by the detector. Infrared detection mode, please use it in the environment with low light or turn off the light, because the camera only needs to turn on the infrared fill light when the light is low.
3. Because the equipment used for candid photography, eavesdropping, and tracking is not always on, the installer can remotely control this equipment to be turned on or off. Which may cause detection failure when we hold the detector to detect.
In this case, we can open the detector and place it in a suspicious environment. When the installer opens the eavesdropping and eavesdropping equipment remotely, the detector can detect and prompt the radio frequency or infrared signal emitted by them in time.
4. Charging. The unit is equipped with a Type-c charging cable as standard, and it can be charged by any 5V voltage USB output charger.
The charging indicator is red when it is in the charging state, and the charging indicator turns off when fully charged.
RF frequency detection range: 10-3000Mhz
RF signal detection distance: (depends on the signal source signal strength)
(1) GSM: 50-300CM
(3)Wi-Fi: 10- 100CM
Infrared detection frequency range: 750-1000nm
Infrared detection distance: 1-10 meters (depending on the signal intensity of the light source)
Laser indicator power: class II 1mw
Observation eyepiece magnification: 5 times optical magnification
Built-in rechargeable lithium battery capacity: 500mah
Charging interface: Type-c
Charging voltage: DC 5V1A
Built-in battery life: more than 12 hours
Product Weight: about 215g
1 x Detector Host
1 x Antenna
1 x Charging USB Cable
1 x English User Manual
1. Radio frequency signal detection antenna
2. Optical scanning module
3. Aluminum alloy body
4. Radio frequency detection indicator light
6. Eyepiece focus knob
7. Optical probe observation eyepiece
8. Laser indicator
9. Infrared receiving sensor
10. USB Charging Interface
11. Power ON/OFF
12. RF sensitivity regulation
13. Radio frequency signal level indication
14. Charging indicator
15. Infrared detection mode indicator light
16. Optical scanning ON/OFF
17. Voice indicator ON/OFF
18. Infrared detection mode switch key