Google assistant / Amazon Alexa Feature had been opened before ,If have any question during the using , you can contact us first ,or WhatsApp : 0086 13342949387 ,I will help you refresh the Alexa function
Without battery ,When you used the plug powered ,no need to installed the battery
APP:Tuya Smart / Smart Life
-Item Type: Tuya WiFi Doorbell
-Video: 1920×1080/30fps
-Audio: Two-way talk with Noise Cancellation
-Speaker: Built-in Speaker
-Visual Angle: 130°
-Infrared: Auto dual filter switch IR LED
-Network: WiFi 2.4GHz, IEEE 802.11 B/G/N, AP *Hotspot/QR Code
-Storage: Micro SD Card 8G/16G/32G/64G/128G (not included)
-Recording: APP recording/Local Storage *Recording/Real-time Play Back
-Snapshot: Support at APP
-Activation: APP remote wake up, PIR activate, button activate
-Response Time: Millisecond level response
-Notification Push: Within seconds
-PIR: PIR motion detect. Sensitivity adjustable
-Working temperature and humidity: -25℃~55℃, humidity is less than 90% (non-condensing)
-Power supply: 4800mah battery ; AC/DC 12-24V/2A ( power supply adapter)
Sensor Night Light USB Powered Door Chime:
– Door Chime with PIR motion sensor & night light function
– With LED flashing light when doorbell ringing
– 58 ring tones for choosen (16 chord)
– 4 grade volume adjusting
– 150M remote range/receiving range (open space)
– Power Supply: DC5V, 1A (by usb port)
– Working Frequency: 433Mhz
– Volume dB: 25dB ~ 85dB
– Working Temperature: -20℃~+50℃
110V-240V to 12V-24V Power supply adapter:
Plug:EU/US/UK


Powered by using your home’s existing doorbell wiring (12V-24V) and rechargeable 18650 battery(Not Included). Two power supply methods meet your different needs. You can install the Doorbell Camera without using any complicated tools. It comes with screws and double-sided adhesives allowing you to install it anywhere. Please connect the phone and test the function of the machine before installation.
365 days &24 hours long Monitoring and Loop Recording
Support Google Assistant and Alexa voice control
If have any question during the using , you can contact us first ,Our whatsapp : 0086 13342949387 ,I will help you refresh the alexa function
HD 1080P Clearer Night Vision
130degree View Angle ; giving you 24/7 surveillance.

58 ring tones for choosen (16 chord)
grade volume adjusting
150M remote range/receiving range (open space)
Q:What should I pay attention to when testing?
A:Please read our manual carefully before testing, if any questions, please check with our factory. Most importantly, when speak with visitor in front of doorbell, pls place the phone at least 5m away from the doorbell, which won’t cause signal interference or noise.
Q: When does the doorbell need to be reset? And how to reset?
A: It needs to be reset when the doorbell couldn’t work well normally or can’t be connected to the phone. You can use the screwdriver or other tooling to press the Reset hole for about 10 seconds to reset.
Q: How to do if repeated adding failed?
A: After adding failed for first time, please reset the doorbell or power off, then try to add again. And it only supports 2.4GHZ WIFI router, please make sure you are using a 2.4GHZ WIFI router, also correct wifi password.
Q: The doorbell video cannot be previewed properly?
A: Check whether network is good or not, you can place the doorbell close to the router. If still not works, pls reset the doorbell and add again.
Q: How to change doorbell network to another router?
A: Remove the device on the APP and configure the device again.
Q: Why Can’t I receive the push message notification by phone APP?
A: Please confirm that the APP has been running well on the phone, and relevant reminder function has been opened like message notification and authority confirmation in the phone system.
Q: Why doesn’t the device identify the SD card?
A: Please insert the SD card before doorbell powered on. And make sure whether SD card is good and FAT32 format or not.